{"id":549785,"date":"2025-07-17T10:46:25","date_gmt":"2025-07-17T14:46:25","guid":{"rendered":"https:\/\/www.finehomebuilding.com\/?p=549785"},"modified":"2025-07-22T13:51:13","modified_gmt":"2025-07-22T17:51:13","slug":"stud-spacing-jig","status":"publish","type":"post","link":"https:\/\/www.finehomebuilding.com\/2025\/07\/17\/stud-spacing-jig","title":{"rendered":"Stud-Spacing Jig"},"content":{"rendered":"

Here\u2019s a jig that isn\u2019t necessarily intended for the seasoned framing carpenter but it may be useful if you\u2019re new to the trades or if you only occasionally frame walls. I came up with this jig, which fits between each stud, to make the framing process faster.<\/p>\n

It allows me to skip the layout lines on the top and bottom plates. And for walls that can\u2019t be built on the ground, it works great as a backer to hold each stud secure while I toenail it in place. Once the first stud is in, I use the jig to work my way down the wall.<\/p>\n

I built the jig out of 2x4s, with a 16-in. center and two sides. One side is 141\/2 in. long, which is the distance between two studs laid out 16 in. on-center. The other side is 135\/8 in. long. I use that side between the first and second studs on a new wall. That way the drywall will land on the center of the stud when I\u2019m starting from that corner. I also added handles on both sides for convenience.<\/p>\n

It\u2019s important to keep in mind that this jig only ensures proper spacing between studs, but it is just as important to make sure that studs are plumb. So start with a plumb stud and double-check periodically that the studs are staying plumb. You may need to make minor adjustments along the way.<\/p>\n

\u2014 Mark Thill Jr.; @streamline_woodshop<\/a>. Edited by Mark Petersen.<\/em><\/p>\n

From Fine Homebuilding<\/em> #333<\/a><\/p>\n

RELATED STORIES<\/strong><\/p>\n